Physico-Chemical Mechanics
NanoERA Bilateral Seminar
FP7 - INCO.2010-6.1 - 266529 BY - NanoERA
"Institutional Development of Applied Nanoelectromagnetics:
Belarus in ERA Widening"
NanoERA Bilateral Seminar
at IMech-BAS and University "Prof. A. Zlatarov" Burgas
20-25 August 2012
Program
20 August 2012
Scientific Seminar at IMech-BAS, Sofia, Block 4, Room 200
9:45 - 10:00 Registration
10:00 - 10:15 Opening
10:15 - 10:30 Overview of objectives and activities of NanoERA project
Sergey Maksimenko - project coordinator
10:30 - 11:00 Challenges and perspectives of nanoelectromagnetics
Sergey Maksimenko, Gregory Slepyan - Belarus State University
11:00 -11:30 Electromagnetic properties of polymer composites filled with different nanocarbon inclusions in microwave frequency range
Polina Kuzhir et al. - Belarus State University
11:30 - 12:00 Nanomechanical properties and profiling of different materials using nanoindentation
tester equiped with AFM and 3D Profilometer
Evgeni Ivanov - OLEM, Institute of Mechanics-BAS
12:00-14:00 Lunch
14:00 - 14:30 The first observation of antenna resonance in thin single-wall carbone
nanotube films.
M.V.Shuba, A.G.Paddubskaya, P.P.Kuzhir, S.A.Maksimenko, et al.
Belarus State University
14:30-15:00 Effective non-distractive cutting of single-wall carbon nanotubes
M.V. Shuba, A.G. Paddubskaya, P.P. Kuzhir, S.A. Maksimenko, et al.
Belarus State University
15:00 - 15:30 Macro and micromechanical and tribological properties of different materials
I.Borovanska - Institute of Mechanics, Bulgarian Academy of Sciences
15:30-16:30 Round Table Discussion "Bilateral Collaboration between the Institute of
Mechanics - BAS and the Institute for Nuclear Problems - Belarus State
University within the NanoERA project"
21-22 August
Visit at Open Laboratory of Experimental Micro and NanoMechanics (OLEM), Block 4
Demonstration of the equipment and tests, available in OLEM:
- Macromechanical testing with UMT-2 (CETR, USA). Stress-strain tests in different modes (e.g. tensile, twist, three-point bending, compression, etc.), creep and relaxation.
- Micromechanical testing with UMT-2 (CETR, USA). Tribology: friction and wear, coefficient of friction. Microscratch. Microindentation.
- Nanomechanical testing with UNMT (CETR, USA) and AFM. Nanoindentation with Berkovich indenter. Scanning with AFM of the nanoindentation imprint.
- Nanostructure - Scanning of the surface with Atomic Force Microscopy.
- 2D and 3D profiling of the surfaces. 3D topography for quantitative and qualitative determination of roughness of the surfaces. 2D and 3D scanning and topography of the profile of the imprint after scratch, friction and microindentation test.
- Rheological and DMTA investigations with AR-G2 rheometer (TA Instruments).
Selected experiments with samples provided by the partners from the Institute for Nuclear Problems - Belarus State University.
23-25 August
Presentation of NanoERA project at the University "Prof. Asen Zlatarov", Burgas
Seminar with selected presentations
Round Table Discussion
Visit in the University "Prof. Asen Zlatarov"
Participation in the Seminar at IMech-is free of charge
Organizers:
Prof. Rumiana Kotsilkova - Tel. 979-6462, e-mail: kotsilkova@imbm.bas.bg
Assoc. Prof. Evgeni Ivanov - Tel. 979-2479, e-mail: ivanov_evgeni@imbm.bas.bg
Modified date:08-05-2021