Institute of Mechanics

Заемана длъжност: Доцент

Направление: Мехатроника

Стая №: 225

Тел: (02) 979 6434

E-mail: abadjieva@gmail.com

Научни степени, организация, година:

Магистър «Механика», СУ “ Св. Климент Охрдски”, 1998

Магистър по «Математика и информатика», СУ “ Св. Климент Охрдски”, 1998

Доктор по“Приложна механика” 2012

Области на професионален интерес (ключови думи):

Приложна механика,

Механо-математично моделиране на механични трансмисии,

Механо-математично моделиране на динамичните процеси при автомобилни катастрофи,

Интернет приложения и мрежи,

Графичен дизайн

Избрани публикации:

1.Abadjieva E., V. Abadjiev, H. Kawasaki. Pitch Configurations- An Innovative Solution to the Synthesis of Hyperboloid Gears. Part 1. Essence and Basic Characteristics of the Innovative Solutions, Advances in Education Research, 2013 The 2nd International Conference on Social Science and Education (ICSSE 2013), December 24-25,2013, Hong Kong, China, Vol. 47, pp. 511-517, ISSN: 2160-1070

2.Abadjieva E., V. Abadjiev, H. Kawasaki. Pitch Configurations - An Innovative Solution to the Synthesis of Hyperboloid Gears. Part 2.Analytical and Software Content of Pitch Configurations, Advances in Education Research, 2013 The 2nd International Conference on Social Science and Education (ICSSE 2013), December 24-25, 2013, Hong Kong, China Vol. 47, pp. 518-525, ISSN: 2160-1070

3. Abadjieva E., V. Abadjiev, H. Kawasaki, T., Mouri. Application of the Gearing Primitives to Skew-Axes Gear Set Synthesis. Part 2. Mathematical Model for Synthesis and Applications, 12th International Congress on Theoretical and Applied Mechanics, 23-26 September 2013, Saints Constantine and Helena, Varna, Bulgaria (published on CD)

4. Abadjieva E., V. Abadjiev, H. Kawasaki, T., Mouri. Application of the Gearing Primitives to Skew-Axes Gear Set Synthesis. Part 1: Principles of the Synthesis of Skew-Axes Gears Upon a Pitch Contact Point, 12th International Congress on Theoretical and Applied Mechanics, 23-26 September 2013, Saints Constantine and Helena, Varna, Bulgaria (published on CD)

5. Abadjieva E., V. Abadjiev, H. Kawasaki, T., Mouri. On the Synthesis of Hyperboloid Gears and Technical Applications, Proceedings of ASME 2011 International Power Transmissions and Gearing Conference, IDETC/CIE 2013, 4-7 August 2013 Portland, Oregon, USA (published on CD)

6. Abadjieva E., V. Abadjiev. Analytical and Computer Synthesis of Face Linear Helicoids. Proceedings of 4^rd International Conference Power Transmission’09, Sinaia, Romania, 20.06.-23.06 2012, (published on CD)

7. Abadjieva E., V. Abadjiev. Geometric Synthesis and Computer Modelling of Conic Linear Helicoids. Proceedings of 4^rd International Conference Power Transmission’09, Sinaia, Romania, 20.06.-23.06 2012, (published on CD)

8. Abadjiev V., E. Abadjieva, D. Petrova. Synthesis of Hyperboloid Gear Sets Based on the Pitch Point Approach. Journal Mechanism and Machine Theory, vol. 55, Pergamon, 2012, pp. 51-66.

9. Abadjiev V., E. Abadjieva, D. Petrova. Pitch Configurations of Hyperboloid Gear Sets with Internal Mating Gears. Analytical and Computer Synthesis. Comptes Rendus De L’Academie Bulgare Des Sciences, Sofia 2012, vol. 65, No 4, 2012, pp. 449-456.

10. Abadjiev V., E. Abadjieva, D. Petrova. Pitch Configurations of Hyperboloid Gear Sets with Internal Mating Gears. Definitions and Mathematical Model. Comptes Rendus De L’Academie Bulgare Des Sciences, Sofia 2012, vol. 65, No 2, 2012, pp. 307-314.

11. Abadjiev V., E. Abadjieva, D. Petrova. Non-orthogonal Hyperboloid Gears. Synthesis and Visualization of Pitch Configurations with Normal Orientation. Comptes Rendus De L’Academie Bulgare Des Sciences, Sofia 2011, vol. 64, No 9, 2011, pp. 1311-1319.

12. Abadjiev V., E. Abadjieva, D. Petrova. Non-orthogonal Hyperboloid Gears. Synthesis and Visualization of Pitch Configurations with Inverse Orientation. Comptes Rendus De L’Academie Bulgare Des Sciences, Sofia 2011, vol. 64, No 8, 2011, pp. 1171-1178.

13. Abadjiev, V., E. Abadjieva, D. Petrova. Mathematical Modelling of the Dynamic Processes of a High-Velocity Forging Machine, Machine Design, Vol. 3, Faculty of Technical Science, University of Novi Sad, pp.151-157, ISSN 1821- 1259

14. Abadjiev, V., E. Abadjieva, D. Petrova. Pitch Configurations: Definitions, Analytical and Computer Synthesis. Proceedings of ASME 2011 International Power Transmissions and Gearing Conference, IDETC/CIE 2011, 28-31 August 2011 Washington DC, USA (published on CD)

15. Abadjieva E., G. Bojadjiev, D. Petrova, V. Abadjiev. On the Mesh Region Synthesis of Spatial Rack Drives with a Rotating Link Having a Cylindrical Linear Helicoids, Journal of Theoretical and Applied Mechanics, Volume 40, No 2, Bulgarian Academy of Sciences, Sofia, 2010, pp. 3 – 10 (the material is presented on 11^th National Congress on Theoretical and Applied Mechanics, 2-5 Sept. 2009, Borovets)

16. Абаджиева, Е., Математични модели на кинематичните процеси в пространствени гребенни механизми и приложението им, СНС по Приложна математика и механика, София, 2010, 165 стр.

17. Abadjiev, V., E. Abadjieva. Research of the Pile Foundation Process Dynamics.. Simulation Results. Comptes Rendus De L’Academie Bulgare Des Sciences, Sofia, 2010, vol. 63, No 12, 2010, pp. 1795-1806

18. Abadjiev, V., E. Abadjieva. Research of the Pile Foundation Process Dynamics. Mathematical Modelling of the Pile Tamping Dynamics. Comptes Rendus De L’Academie Bulgare Des Sciences, Sofia 2010, vol. 63, No 11, 2010, pp. 1651-1658.

19. Abadjieva E., Abadjiev, V. On the Kinematic Theory of Spatial Rack Drives. Comptes Rendus De L’Academie Bulgare Des Sciences, Sofia, vol. 61, No 12, 2008, pp. 1525 – 1534, ISSN: 1310-1331

20. Abadjiev V., Abadjieva E., Vector Analysis of the Sliding Velocity Function of Rack Drives, Theoretical and Applied Mechanics J., Sofia, vol. 37, No 4, 2007, pp. 15-24.

21. Abadjiev V., D. Petrova, E. Abadjieva. Mathematical Modelling for Synthesis and Design of Non-Orthogonal Wormgears with a Straight-Line Tooth Contact, III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering, C.A. Mota Soares et.al. (eds.) Lisbon, Portugal, 5–8 June 2006.

22. Abadjiev V., D. Petrova, E. Abadjieva. An Optimization of Type Wildhaber Gear Sets Based on Loading Capacity. A Software Estimate of the Hydrodynamic Loading Capacity, In Proc.: 15^th Int. Conf. on Manufacturing Systems ICMaS 26-27 October 2006, Proceedings, Editura Academia Romane, Bucharest, 2006, pp. 425-428.

23. Abadjiev V., D. Petrova, E. Abadjieva. An Optimization of Type Wildhaber Gear Sets Based on Loading Capacity. Kinematic Approach to Criteria Construction, In Proc.: 15^th Int.l Conf. on Manufacturing Systems ICMaS 26-27 October 2006, Proceedings, Editura Academia Romane, Bucharest, 2006, pp. 421-424.

24. Abadjiev V., D. Petrova, E. Abadjieva. Geometric Conditions for Existing of Hyperbolic Gears Pitch Circles, In: Proc. The 2nd Int. Conf. “Power Transmissions 2006”, Faculty of Technical Sciences, Novi Sad, 25-26. April. 2006, pp. 111-116.

25. Abadjiev, V., E. Abadjieva. Basic Velocity Characteristics of Spatial Gearings. Mechanics of Machines, XXIV, Vol. 2 (63), Ed. Technical University-Varna, 2006, pp.79-80.

Проекти:

- Договор No TH 820/98 “Изследване на регулярни и случайни процеси на системи твърди тела”, Възложител: Национален съвет “Научни изследвания”, Министерство на образованието и науката, 1999-2003, (Изпълнител)

- Договор “Динамика и оптимизация на управляеми механични системи”,Възложител: Институт по механика, 1999-2002, (Изпълнител)

- Договор “Моделиране и оптимизация на управляеми механични системи”, Възложител: Институт по механика, 2002 – 2005, (Изпълнител)

- Договор “Динамика и оптимизация на управлявани механични системи”, Възложител: Институт по механика, 2005-2008, (Изпълнител)

- Договор No ТН 15/05 “Роботизирани средства за спасителни операции”, Възложител: НФ “Научни изследвания”, Министерство на образованието и науката, 2005- (Изпълнител).

- Договор “Оптимизация на роботехнически и управлявани биомеханични системи”, Възложител: Институт по механика, 2008 – , (Изпълнител)

- Договор между Национален иновационен фонд и „Химически продукти” ООД, гр. Ямбол по Проект No ИФ 0258/23.12.2008 г. „Оползотворяване на технологичния отпадък от производството на минерални термо- и звукоизолационни изделия, чрез разработване на нови продукти”, 2009-2011 г. (Изпълнител)

-Задача SP8. „Standardization” към VІ FP “HYDROMEL” – FP6 Contract: NMP2-CT-2006-026622 (Hybrid ultra precision manufacturing process based on positional- and self-assembly for complex microproducts”, 2008-2010 г (Изпълнител)

Членство в научни организации:

Награди:

Награда на Българската академия на науките за най-млад учен -2004г.

Лична страница