Institute of Mechanics

Position: Docent dr.

Department: Solid Mechanics

Room number: 307

Phone: +359 2 979 64 42

E-mail: aniyanakieva@imbm.bas.bg

Scientific degrees, institution, year:

Docent, Inst. of Mech., BAS, 2011

Assis. prof., Inst. of Mech., BAS, 2003

Fields of Research:

Mechanics of materials, Nanomechanics, FEM

Academic lecture:

Yanakieva A., On Composites Reinforced by Carbon Nanotubes, 10.01.2012, 10h, hall 200, Institute of Mechanics.

Acnowledgement: Part of presented results were obtained during my research stay in IPPT (Dep. Mechanics of Materials), Warsaw which was granted from the European Virtual Institute KMM-VIN (KMM-VIN Research fellowship 2011).

Selected Publications:

1. Zenon Mrόz, A.Yanakieva, V. Valeva, J. Ivanova, Analytical Pullout Analysis for Carbon nanotube-cement Composites under Static Loading, Comptes rendus de l'Académie bulgarie des Sciences, Tome 66 (5), (in print), (2013)
2. Kazakov K., A.Yanakieva, On the Nonlinear SDOF Free Vibration Analysis, Comptes rendus de l'Académie bulgarie des Sciences, Tome 66 (2), 261-268, (2013)
3. Nikola N., D.Pashkuleva, A.Yanakieva, Identification of Mechanical Characteristics of an Amorphous Metallic Material, Comptes rendus de l'Académie bulgarie des Sciences, Tome 66 (1), 119-126, (2013)
4. Baltov A., A.Yanakieva, New Materials with Application in Structural Engineering, In Proc.: XII Inter. Scientific Conf. VSU, 7-8 June, pp I-1-9, Sofia, Bulgaria (2012)
5. Kazakov K., A.Yanakieva, Computational Effectivness of the Augmented Lagrange Method in the FE Simulations of Pull-out of Steel Bar and Concrete, Comptes rendus de l'Académie bulgarie des Sciences, Tome 65 (2), 219-224, (2012)
6. Yanakieva A., M.Datcheva, E.Stoimenva, Statistical Analysis of the Effect of Epoxy Insulated Steel Bar on the Pull-Out Bonding, Comptes rendus de l'Académie bulgarie des Sciences, Tome 64 (7), 1035-1042, (2011)
7. Kazakov K., A.Yanakieva, On the Sress Distribution in Plates with Bolt Connection Modelled by Contact FE, In Proc.: XI Int. Sci. Conf. VSU, Vol.1, pp I-163-168, Sofia, Bulagaria (2011) download abstract
8. Nikolov N., A.Yanakieva, D.Pashkuleva, FE Modeling of Sheet Steel Speciment under Biaxial Loading, In Proc.: The VII Int. Conf. Research and Development of Mechanical Elements and Systems, IRMES2011, 27-28 April, pp 603-610, Zlatibor, Serbia (2011) download abstract
9. Yanakieva A. and K. Kazakov, FEM Assessment of the Mechanical Properties of Single Wall Carbon Nano Tubes, In Book of Abstracts, GAMM, pp 157, April 18-21, Graz, Austria, (2011) download abstract
10. Yanakieva A. and K. Kazakov, Dynamic Computational Model of Cyclic Loading of Steel bar in unconfined Concrete Solid, J. of Theor. and Appl. Mech. 40(2), 47-54, (2010)
11. Yanakieva A., Contact Texture Impact on Covered Steel-Concrete Bond, In Proc.: 37 SolMech Conference, Sept. 6-10, pp 212-213, Warsaw, Poland (2010)
12. Baltov A., A. Yanakieva, N. Nikolov, Zones de sécurité en cas de détérioration de la liaison d’acier/béton d’une structure en béton armé, Revue de génie industriel (5), 36-42, (2010) paper
13. Baltov A. and A. Yanakieva, Numerical Method to Interpred the Optical Set Points Experimental Results for Deformed Crystalline Bodies, On CD, March 22-26, GAMM, Karlsruhe, Germany (2010)
14. Yanakieva А., K. Kazakov, On the Influence of the Steel Protections over the Bond Capacity between the Concrete and the Steel Elements, In Proc.: XI Nat. and V Int. Sci. Conf., Planning, design, construction and building renewal, 25-27 Nov., pp 547-554, iNDiS, Novi Sad, (2009)
15. Yanakieva A. and K. Kazakov, The Effect of the Friction Coefficient on Generation of Numerical Models Simulating Steel Concrete Bond-Slip Behaviour, In Proc.: XII Int. Conf. on Mechanics and Technology of Composite Materials, MTCM, 22-24 Sept., pp 438-443, Varna, Bulgaria (2009)
16. Kazakov K. & A. Yanakieva, FEM numerical simulation and ductile capacity analysis of bond-slip between epoxy coated plain steel bars and concrete, Surface Effects and Contact Mechanics IX, WIT PRESS, 9-11 June, pp 217-226, Algarve, Portugal (2009)
17. Yanakieva A. and K.Kazakov, Comparison of FE computational models of the pullout process of steel bar in concrete solid, In Proc.: XVII International Conference on Computer Methods in Mechanics, CMM, 18-21 May, pp 513-514, Zielona Góra, Poland (2009)
18. Yanakieva A. and K.Kazakov, FEM Simulation of Bond-Slip Behaviour between Epoxy Coated Plain Steel Rebars and Concrete, On CD: International Conference 70 Years of FCE STU, 4-5 Dec., Bratislava, Slovakia (2008)
19. Ynakieva A. and K. Kazakov, On the Strength Force of Steel Bar Pullout of a Concrete Body, In Proc.: Int. Conf. of Civil engineering and structures-theory and practice, DCB, 12-14 Sept., pp 215-220, Varna, Bulgaria (2008)
20. Yanakieva A., Protection of metal joints and Rehabilitation of structures, III International conference of Civil Engineering and Structures-Theory and Practice, DCB, Plovdiv, Bulgaria, 7-9 Oct., pp 219-227 (2004)
21. Yanakieva A., Bonding between zing-coated steel reinforcement and concrete regarding reinforcement forcing out, In Proc: International Sci. Conf. "50 Years University Of Forestry", Session Management and Sustainable Development Fundamental Sciences, Sofia, Bulgaria, 1-2 April,  pp 266-268 (2003)
22. Yanakieva A., Bonding between protected steel reinforcement and concrete, In Proc.: IX National Congress on Theoretical and Applied Mechanics, Varna, Bulgaria, 19-22 Sept. 2001, Volume 1,  pp 627-632 (2001)
23. Yanakiev Ya., A. Yanakieva, K. Delev, Combustibility Reduction of Thin-walled Structures with a Timber Frame, In Proc.: Int. Conf. on Experimental Model Results and Testing of Thin-walled Structures, Sept., pp.135-138, Prague, Czech Republic (1997)

Membership:

Institute of Mechanics tel.: +359 2 973 31 40; fax: +359 2 870 74 98; e-mail: office@imbm.bas.bg