Print this page

Projects


  • Project DFG-Wu 496/5-1(2012-2016) financed by the DFG: Seismic wave field evaluation via non-conventional BIEM.

  • Project ESP.EAP.CLG 984136 (2011-2013) financed by NATO: Modeling of seismic wave propagation in inhomogeneous and heterogeneous geological media.

  • Project ДФНИ И02/4 (2014-2017) with National Science Fund: Integro-differential equations for solution of coupled BVPs for multifunctional composites with heterogeneities.

  • Project D-02-15 (2010-2012) with National Science Fund: Hybrid approach based on the boundary integral equationsfor analysis of cracked piezoelectric materials.

  • EBR research project-collaboration between BAS and Aristotle University, Greece(2015-2017): Numerical modelling via BIEM for seismic wave propagation in inhomogeneous geological media.

 

  • Kinetic energy absorbers – (2015 – 2018) funded by the Brazilian National Council for Scientific and Technological Development (CNPq) in collaboration with the University of Sao Paulo, Brazil.

  • DFNI № E02 / 10 121214, Mechanical and mathematical modeling of the behavior of intelligent bi-material structures (supervisor: Assoc. Prof. Anna Yanakieva)

  • Project “Development of a new approach for structural design and properties characterization of amorphous and nano –crystalline metal foams”, DH 07/17 15.12.2016 – 14.12.2019. Project coordinator prof. L. Drenchev, Institute of Metal Science, equipment, and technologies “Acad. A. Balevski” with Center for Hydro- and Aerodynamics-BAS

  • Joint project between IMEH-BAS and IFH-BAS № T02-22 / 12.12.2014 on "Development of a hybrid method for the quantitative characterization of the mechano-plastic and the mechano-elastic properties of micro- and nanostructural mono- and polyphase single and / or multilayer coatings, characterized by nano- and micro- thicknesses", funded by the National Science Fund, head-prof. Dimitar Stoychev (IFH-BAS).

  • Joint project NTSC / Germany 01/6 on DAAD from 3.09.2014 on the topic "Nanoscale mechanical characterization of ultra-thin film materials for RF MEMS" with Fraunhofer Institute for Applied Solid State Physics, Freiburg, Germany.

  • PROJECT „DEVELOPMENT OF TECHNOLOGIES FOR ENERGY SAVING PIPES OUTDOOR", FINANCED BY THE NATIONAL INNOVATION FUND UNDER CONTRACT№ № 6 ИФ-02-24/15.12.2012, BENEFICIARY “CHEMICAL PRODUCTS “ LTD YAMBOL,PARTNERSHIP INSTITUTE OF MECHANICS-BAS

  • PROJECT „ NEW THERMO AND SOUND INSULATION PRODUCTS AND TECHNOLOGY OF PRODUCTION” CONTRACT BG161PO003-1.1.06-0066-C0001/07.12.2013, OPERATIONAL PROGRAM "DEVELOPMENT OF THE COMPETITIVENESS OF THE BULGARIAN ECONOMY 2007-2013, BENEFICIARY “CHEMICAL PRODUCTS” LTD YAMBOL,PARTNERSHIP INSTITUTE OF MECHANICS-BAS

  • PROJECT “AUTOMATED NDT SYSTEM OF MECHANICAL PROPERTIES AND STRUCTURE OF METAL MATERIALS ” CONTRACT BG161PO0031.1.010058C0001, OPERATIONAL PROGRAM "DEVELOPMENT OF THE COMPETITIVENESS OF THE BULGARIAN ECONOMY 2007-2013, BENEFICIARY UNITEST 07 , PARTNERSHIP INSTITUTE OF MECHANICS-BAS

  • PROJECT“ DEVELOPMENT OF SPECIAL THERMO- AND ACOUSTIC INSULATION PRODUCTS AND TECHNOLOGIES FOR THEIR PRODUCTION”(S.T.A.I.) “, FINANCED BY THE NATIONAL INNOVATION FUND UNDER CONTRACT № ИФ-02-44/31.05.2006, BENEFICIARY “CHEMICAL PRODUCTS” LTD YAMBOL,PARTNERSHIP INSTITUTE OF MECHANICS-BAS

  • INNOPIPES: Marie Curie Actions, International Research Staff Exchange Scheme, grants number: PIRSES-GA-2012-318874 of the FP7(2012-2016), project titles: INNOVATIVE NONDESTRUCTIVE TESTING AND ADVANCED COMPOSITE REPAIR OF PIPELINES WITH VOLUMETRIC SURFACE DEFECTS. With beneficent Institute of mechanics – BAS.

  • SHIPINSPECTOR: grant agreement N° FP7-SME-2007-1-218432 of the FP7(2006-2010), project titles: DETECTION OF SAFETY CRITICAL CRACKS AND CORROSION IN SHIPS USING NOVELSENSORS AND SYSTEMS BASED ON ULTRASONIC LINEAR PHASED ARRAY TECHNOLOGY. With beneficent Bulgarian Society for NDT.

  • EBR Project between Institute of Mechanics – BAS and V. A. Belyi Metal Polymer Research Institute of National Academy of Sciences of Belarus, Gomel, Belarus(2017-2020). Project title: Ultrasonic diagnostic of substantially heterogeneous condensed media and metal polymer joint.
  • EBR Project between Institute of Mechanics – BAS and E. O. Paton Welding Institute of National Academy of Sciences of Ukraine, Kiev, Ukraine(2016-2019). Project title: Investigation in area of increasing efficiency and reliability for technique long range ultrasonic testing.

  • EBR Project between Institute of Mechanics – BAS, Institute of metal science, equipment and technology - BAS and AO “NPO CNIITMASH”, Moscow, Russia(2016-2019). Project title: Securing and extension of the resources of Units 5 and 6 of Kozloduy NPP on the basis of the use of new methods and technologies for non-destructive testing and diagnostics for calculation of their reliability and workability.

  • EBR Project between Institute of Mechanics – BAS and Institute of engineering since of Ural branch of Russian Academy of Sciences, Ekaterinburg, Russia(2012-2014). Project title: Investigation of influence in elastic-plastic deformation on magnetic and acoustic properties in multilayer material with the purpose of developing non-destructive methods for diagnostic of their state.

  • EBR Project between Institute of Mechanics – BAS and M. N. Mikheev Institute of metal physics of Ural branch of Russian Academy of Sciences, Ekaterinburg, Russia(2012-2014), Project title: Development of methods for diagnostic, increasing reliability and working time for austenitic steels and alloys equipments, working in extreme condition.

  • EBR Project between Institute of Mechanics – BAS and E. O. Paton Welding Institute of National Academy of Sciences of Ukraine, Kiev, Ukraine(2010-2013). Project title: Investigation of methods for detection imperfection in industrial metal constructions, using technique phased array.

  • EBR Project between Institute of Mechanics – BAS and V. A. Belyi Metal Polymer Research Institute of National Academy of Sciences of Belarus, Gomel, Belarus(2010-2013). Project title: Development of new nanostructure powder systems, methods for non-destructive diagnostic and modeling for investigation physico - mechanical and tribology - technical properties of composition materials and coatings on the basis of metal matrix.

  • EBR Project between Institute of Mechanics – BAS and Institute of engineering since of Ural branch of Russian Academy of Sciences, Ekaterinburg, Russia(2009-2011). Project title: Using non-destructive methods for evaluation of NPP equipment state.

  • EBR Project between Institute of Mechanics – BAS and AO “NPO CNIITMASH”, Moscow, Russia(2009-2011). Project title: Ultrasonic testing of vessels and pipelines thickness by EMA- equipment.

  • Project between Institute of Mechanics – BAS and HP „Yambol”: Grants № BG 161 PO00-1.1106-0066-C0001, OP „Development and competitiveness of the Bulgarian Economy”(2007-2013), title: ” New thermo- and sound isolation products and technology for manufacturing”.

  • Project between Institute of Mechanics – BAS and HP „Yambol”: Grants № ИФ-02-24/15.12.2012, title: "Development of technology for energy-saving pipes for outside installation (TehET)", National innovative fund for scientific investigation (2012-2015) .

 

  • Project „Synthesis of automatically mechatronic system for metalworking /SiMAM/”. Grants № 6ИФ-02-1/15.12.2012г., National innovative fund for scientific investigation(2012-2013) .

 


Modified date:07-06-2017